Eos Solid Surfaces - Commercial

Specifications

Sheet Specifications

We offer the following sheets sizes as stock items:

121x30x3cm
121x38x3cm
121x30x2cm
121x38x2cm
144x30x1/2in

Custom sizes available upon request.

Top^

Sinks - Solid Surface

Sinks - Stainless Steel

Top^

Testing Data

Technical Data
Item	Specification	Test Method
Specific Gravity	1.75b/cm3	ASTM-D-729A
Water Absorption	0.03%	ASTM-D-570
Hardness (barcol)	56	ASTM-D-2583
Tensile Strength	5537 psi	ASTM-638
Flexural Strength	8580 psi	ASTM-D790
Elongation at Yield	0.50%	ASTM-D-638
Glossiness	5-75	ANSI.Z-124
Wear and Cleavability	Pass	ANSI.Z-124
Point Impact	No Cracks	ANSI-124
Colorfastness	Pass (200 hours)	ANSI-124
High Temperature Resistance	Pass (180° @ 20 minutes)	ANSI-124
Stain Resistance	Rating: 30	ANSI-124
Chemical Resistance	Pass	ANSI-124
Skillet Drop Test	Pass	ANSI-124
Load Test	No cracks. The residual deflection is 0.2mm after removal of the load	ANSI-124
Water Resistance	Pass	ANSI-124
Ignition Test	Burning ceases within 5 seconds	ANSI-124

Top^

MSDS Kitchen and Vanity Sinks

Chemical Product & Manufacturer’s Information
1. Chemical Product Name: Eos Kitchen Sinks, Vanity Bowls
2. Usage: Solid surface Applications
3. Chemical Type: Polyester Resin Plastic
4. Manufacturer: Eos Solid Surfaces, LLC, 2500 Rodman Ave., Portsmouth, VA
5. Technical Contact: Bob Baxter, Director of Product Development
Ingredients
1. No hazardous ingredients according to OSHA-29 CFR 1910.1200
Physical & Chemical Properties
1. Appearance: Solid
2. Odor: May experience slight plastic odor
3. PH: Not applicable
4. Specific Gravity: 1.25
5. Evaporation Rate: Not available
6. Vapor Pressure: Not available
7. Solubility in Water: Insoluble
Health Hazard Data
1. Eyes: Dust generated during fabrication may irritate eyes
2. Skin: Any sharp edges will cut or abrade the skin. Dust generated during fabrication may dry out skin oils.
3. Respiratory Tract: Dust generated during fabrication may cause slight nose or lung irritation if high concentrations of dust (approaching the OSHA PEL) is inhaled.
4. Chronic Effects: Not available
5. Mutagenicity: Not available
First Aid Measures
1. Eye Contact: Upon contact with nuisance dust particles, flush eyes immediately with large amounts of water for a minimum of 15 minutes. Seek medical attention.
2. Skin Contact: Not expected to be a problem.
3. Ingestion: Not applicable
Fire and Explosion Data
1. Flammability: Non-flammable, Class I fire rating
2. Flash Point: Not available
3. Auto-Ignition Temperature: Not available
4. Products of Combustion: Carbon monoxide, carbon dioxide
5. Fire Fighting Media: Use water or dry chemicals to extinguish fires
Reactivity Data
1. Stability: The product is stable
2. Chemical Instability Materials to avoid: Not known
3. Hazardous Decomposition: Not available
4. Hazardous Polymerization: Yes
Spill or Lead Procedures
1. Clean Up: Sweep any dust generated from sanding or sawing the product. If compressed is used to clean up, the concentration of nuisance dust in the air may be increased.
2. Waste Disposal: This material is considered a non-hazardous waste. Dispose of dust or excess material according to applicable federal, state and local regulations.
9. Special Protection Information
1. Eye: Safety glasses when finishing this product
2. Hands: Latex rubber gloves are acceptable protection against dust.
3. Respirator: Wear appropriate dust respirator when ventilation is inadequate (NIOSH Approved) because of generated dust.
Handling & Storage
1. Handling: Do not breathe dust. If user operations generate dust, use ventilation to keep airborne contaminates below the exposure limit.
2. Storage: No specific storage is required.
Other Information
1. This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Eos Solid Surfaces, LLC. The data on this sheet relates only to the specific material designated herein. Eos Solid Surfaces, LLC assumes no legal responsibility for use or reliance upon this data.

Top^

Residential 10-year Warranty

Eos warrants through the fabricator to the original owners of installed Eos products for a period of ten (10) years from the date of installation that the Eos material will be free from manufacturing defects. If a manufacturing defect occurs during the warranty period, Eos will, at its option, replace the defective Eos products at no cost to the end user. The fabricator of the countertops reserves the right to repair the defect in a workmanlike manner should they judge that the material is repairable.

What this Limited Warranty Covers

Eos obligation under the 10-year warranty covers only the provision of replacement material for the failed product.
This limited warranty covers Eos solid surfaces that have been permanently installed in your residence.
This limited warranty covers products that have been maintained according to the Eos surfaces care and maintenance guide provided free of charge at the time of installation, or upon request, by the Eos installer or by Eos.

What this Limited Warranty DOES NOT Cover

This limited warranty does not cover thermal shock, chemical abuse or defects by fabrication, misuse or improper fabrication.
This limited warranty does not cover any additional or supplemental repairs or modifications, such as tile or wall surface modifications, that may be necessary to repair or replace the Eos product covered under this limited warranty; such other repairs and modifications shall be the responsibility of the customer.
This limited warranty does not cover products that have not been paid for in full.
This limited warranty does not cover uses for products exposed to outside weather and climate conditions, abnormal use or conditions, or abuse in any way. “Abnormal use or conditions” includes, but is not limited to, damage from mishandling or misuse, damage from excessive heat or uneven exposure to weather conditions, exposure to ultraviolet light, physical or chemical abuse, and damage from improper care and maintenance.
Eos is not responsible for damage or injury caused in whole or in part by acts of God, job site conditions, architectural and engineering design, structural movement, acts of vandalism or accidents.

Warranty Registration

To register for this limited warranty, you or the Eos Authorized Installer must fill out the warranty registration card or call or write Eos at the phone number or address below to obtain a registration form. Or you may register right now.

To Obtain Service Under this Warranty

To obtain the best service under this limited warranty, contact the source from whom you purchased Eos. For more information about this warranty, please contact Eos directly by writing or calling:

Eos Surfaces
P.O. Box 4146
Portsmouth, VA 23701
Attn: Warranty Department
800-719-3671

In order to obtain service under this limited warranty, you must permit your Eos Authorized Installer or Eos authorized agents to inspect your Eos product at your residence. Also, you must reasonably cooperate with your installer and Eos’ agents in the efforts to service this limited warranty.

Except as provided in this limited warranty, Eos shall not be liable in either tort or contract for any loss of direct, consequential or incidental damages arising out of the use or inability to use the product in residential applications covered by this warranty. Some states do not allow the exclusion or limitation of incidental damages, so the above limitation or exclusion may not apply to you.

Eos makes no other warranty, representation or guarantee, express or implied, with respect to its products, except as expressly stated herein. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state or, in Canada, from province to province.

This is the only warranty offered by Eos. No one other than Eos is authorized to make any warranty promise with respect to Eos solid surfaces.